Du har ingen varer i handlekurven.

NUX B-3 WIRELESS MIC SYSTEM

kr 1 995,00
Produsent: NUX
SKU: 6747736
Tilgjengelighet: På lager
1Weblager
1Oslo Sentrum
+ -
NUX B-3 Wireless system
Wireless Snap-on Microphone System
Snap-on&Go Wireless

Features
2.4 GHz ISM band
24-bit / 48KHzHi-Resolution Sound Quality
6 Built-in switchable Channels
Range				> 100 feet line-0-site Outdoors.
Dynamic Range			108db
Super Low Latency

The NUX B-3 is a solidly 2.4GHz wireless snap-on microphone system designed for those who want to 
get rid of the cables and enjoy the wireless world without any complicated set-up.

1. It's Compact
2. It's Convenient 3 steps and less than 30s, you're good to go!
Step 1. Turn on the transmitter and the receiver.  5 seconds
Step 2. Snap-on the transmitter to your Microphone and the receiver to your amplifier, mixer, or recorder.  
5 seconds
Step 3. Pairing up and sound check.  20 seconds.
Channel 1 is the default paring channel if you want to use different channels for any reason, just press 
the channel switch on both the transmitter and the receiver to make sure both units are in the same 
channel.  Wait till you see the RF Status LEDs turns blue.
  
3. It's Constructive
For videographers/live streamer
The NUX B-3 comes with hot shoe receiver holder and female XLR to 3.5mm phone jack adapter, with it 
you can easily attach it to your camera for wireless recording.

NUX B-3 Wireless system
Wireless Snap-on Microphone System
Snap-on&Go Wireless

Features
2.4 GHz ISM band
24-bit / 48KHzHi-Resolution Sound Quality
6 Built-in switchable Channels
Range				> 100 feet line-0-site Outdoors.
Dynamic Range			108db
Super Low Latency

The NUX B-3 is a solidly 2.4GHz wireless snap-on microphone system designed for those who want to 
get rid of the cables and enjoy the wireless world without any complicated set-up.

1. It's Compact
2. It's Convenient 3 steps and less than 30s, you're good to go!
Step 1. Turn on the transmitter and the receiver.  5 seconds
Step 2. Snap-on the transmitter to your Microphone and the receiver to your amplifier, mixer, or recorder.  
5 seconds
Step 3. Pairing up and sound check.  20 seconds.
Channel 1 is the default paring channel if you want to use different channels for any reason, just press 
the channel switch on both the transmitter and the receiver to make sure both units are in the same 
channel.  Wait till you see the RF Status LEDs turns blue.
  
3. It's Constructive
For videographers/live streamer
The NUX B-3 comes with hot shoe receiver holder and female XLR to 3.5mm phone jack adapter, with it 
you can easily attach it to your camera for wireless recording.